* Connection MPG with Cnc Breakout Board.
– Connection Diagram –
– Set Up Mach –
Go in to Config — Port and Pins and set ” MPG #1″ as follows.
* Counts / Unit : 4
* Velocity : 500
The velocity value here is a part of adjusting MPG’s Speed, if it is low, it can be fast.
If you do 100, rotating speed of motor can be fast, if you do 1000, you can check it can be slow.
This should find it while testing the value to fit your equipment.
– Using MPG –
If you click tab button in main screen in Mach, the MPG Picture turns up right and can see the part as follows.
If click ” Jog Mode, it can be modified by Cont – Step – MPG
Cont Mode is used when working axis consecutively with keyboard and Step does not move consecutively together keyboard, it can work the step interval selected in Jog Step.
MPG Mode is used when moving axis after connectiong MPG.
If pushed “axis selection button” the moving shaft is changed.
To do this feature, it should need USB keyboard.